The granule packing equipment is suitable for powdery granular materials with good fluidity, and realizes small bag packaging. It is suitable for the production of granule manufacturers. It can be said that it is widely used. In order to further facilitate the understanding of packaging equipment, this article focuses on the use of particulate packaging equipment and maintenance.
First, the use of granule packaging equipment:
It is mainly used for granular materials with good fluidity: washing powder, seeds, salt, feed, monosodium glutamate, dry seasoning, white sugar, etc. It has fast speed and high precision. It is metered in adjustable cup and printed with photoelectric label. The material is available in a complete logo pattern.
Second, the maintenance of granule packaging equipment
Mechanical lubrication
1. The tank part of the machine is equipped with oil meter. It should be refueled once before driving. It can be added according to the temperature rise and operation of each bearing.
2. The worm gear box must store oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it should be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3. When the machine is refueling, do not let the oil spill out of the cup, and do not flow to the surroundings of the machine and the ground. Because oil is easy to contaminate materials, affecting product quality.
Care instructions
1. Check the machine regularly and check it once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. When the drum moves before and after the work, please adjust the M10 screw of the front bearing to the appropriate position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley by hand, and tighten it properly. If it is too tight or too loose, the machine may be damaged. .
5. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.
Article source address: http://
Our height adjustable workbench is made of high-carbon steel, and the surface treatment is powder-coated, which is durable. Below the simple appearance are the sturdy steel lifting column legs, which can bear a maximum weight of 120kg, which can meet daily needs. The adjustable workbench composed of four lifting columns has very good stability during the lifting process and will not shake or slide. The panel can be matched with a length between 79 inches and 94 inches, and a customized size service is provided for a variety of purposes, just for the product to better adapt to your use. 4 different height memory settings to adapt to almost any chair height or people of any height.
Adjustable Height Workbench,Height Adjustable Workbench,Adjustable Workbench,Electric Sit Stand Table,Adjustable Work Table
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplift-system.com