Shanghai Haozhuang Instrument Co., Ltd. develops the LNB brand biochemical incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable
Instructions for use: 1. Place the incubator on a flat and solid ground, adjust the two supporting screws at the lower end of the box to make the box stable. 2. Plug in the power socket (the power supply should be well grounded), press the "power switch", the display is on, at this time the display shows the actual temperature inside the incubator and its working time. 3. Time setting: Time setting includes the setting of "minute" and "hour". Press the "SET" setting key, when the decimal point in the lower right corner of the display position of the "minute" digital tube lights up, that is, enter the "minute" setting state, and then press the "â–²" or "â–¼" key to confirm the "incubator" work this time. Minutes â€time (the longest is 59 minutes); press the“ SET â€key again, when the decimal point in the lower right corner of the“ hour â€nixie tube display is lit, it enters the“ hour â€setting state, then press“ â–² â€or“ â–¼ "Key to confirm the" hour "time (maximum 99 hours) of the incubator's current work. 4. Temperature setting: Press the "SET" key, when the decimal point in the lower right corner of the last digit of the temperature display lights up, it enters the temperature setting state, and then press the "â–²" or "â–¼" key to confirm the incubator. Sub-set temperature (set temperature range is 5 ℃ ～ 50 ℃). When the above steps 3 and 4 are completed, press "ENTER" to confirm the working time of the incubator and the working temperature (set temperature) in the incubator. Note: After the temperature setting is confirmed, the temperature cannot be set back and forth at random, so as to avoid the compressor starting frequently, causing the compressor to overload, and affecting the service life of the compressor. 5. If you need to check the working time and temperature set by the incubator this time, press the "SET" key, the display panel will display the set time and temperature, and then press the "ENTER" key, the display value of the incubator returns To the original working state. 6. If lighting is needed in the incubator, press the "lighting switch"; if lighting is not needed in the box, the lighting switch on the panel should be placed in the "off" position to avoid affecting the upper temperature.
Matters needing attention and maintenance: 1. When the use temperature is low, condensate will be generated in the incubator, and the accumulated water in the bottom water tray at the bottom of the box should be drained regularly. 2. In order to maintain the beauty of the equipment, do not use acid or alkali and other corrosive materials to wipe the surface of the box, and dry the inside of the box with a dry cloth regularly. 3. The power supply used must have a reliable ground wire to ensure that the ground wire of the incubator is in reliable contact with the ground wire of the network power supply to prevent damage caused by electrical leakage or accidental network power supply. When the incubator is stopped, the power plug should be unplugged. 4. The minimum distance between the incubator and the wall should be greater than 10cm to ensure good cooling of the refrigeration system. 5. The room should be dry, well ventilated, the relative humidity should be kept below 85%, there should be no corrosive substances, avoid direct sunlight on the incubator
Product selection is exquisite, exquisite workmanship, excellent quality and reasonable price. Since its establishment, the company has paid great attention to product development, upgrade and update, and constantly launched intelligent instruments with good operability and stability are the principles that Haozhuang Instruments has always followed .
The entire teething toy is chewable and each part are different softness and taste,Our factory is focusing on making multi shapes of Silicone Teething Toys .We have popular fruit shapes like strawberry , grape , banana , orange and so on ; Cute animal shapes like monkey , elephant ,lion and dinosaur , fancy mushroom shape and keys shaped . All of our Silicone Teething Toys are made of 100% food-grade premium silicone, soft and chewy, non-toxic, BPA-free and phthalate free, completely safe for baby!
The Silicone Teething Toys are chewable and each part (ears, horn, body, head) are different softness and taste, perfect for soothing baby's sore gums during teething.
The Silicone Teething Toys are Soft and smooth, easy to grip, can make a rattling sound to keep baby amused, bright color for visual stimulation, all the details are designed for stimulating baby's multisensory stimulation and brain development.
YDS Product categories of Silicone For Baby, we are specialized manufacturers from China, Silicone Baby Spoon, Silicone Baby Bibs Silicone Teething Toys,Silicone Plate & Placemat,Silicone Pacifier Holder,Silicone Pacifier & Nipple, Silicone Bowl wholesale high-quality products of Silicone Baby Products Our Factory Advantages:
1.Mold workshop and 2D and 3D engineer department
2.Solid siliccone compression machine and liquid silicone injection machine
3.Disney and Sedex 4P audit factory
4.ISO 9001,IATF16949,Raw material of FDA LFGB MSDS Certificates
. Look forward to your cooperation!
2.Solid siliccone compression machine and liquid silicone injection machine
3.Disney and Sedex 4P audit factory
4.ISO 9001,IATF16949,Raw material of FDA LFGB MSDS Certificates
. Look forward to your cooperation!
Silicone Teething Toys
Silicone Cute Animal Teether,Baby Silicone Teether Toy,Bpa Free Silicone Teether Toy,Cute Lion Teething Toys
Shenzhen Yindingsheng Technology Co., Ltd , https://www.oemsiliconeyds.com