[Chinese wardrobe net] [difficulty] wardrobe length 2200, inner space 2164 I have designed two 650 drawers on the left and right sides. The drawer is blocked a little after the sliding door is installed. Can't pull it out. The sliding door is not made by us. The sliding door frame is 50mm, three open 755mm, and one set. The length is 2100. The inner space is 2066. I designed the wardrobe 615 drawer on the right side and the 560 long dress area on the left side. The drawer can not be pulled out, the sliding door is also processed outside, the sliding door frame 70mm three open 735 one, seeking expert advice!
[Question] What is the reason why the wardrobe door is blocked and the drawer is blocked?
ã€Best answer】
First, if the width of the sliding door is 50mm, the overlap between the two doors also requires 50mm, which increases the width of the door leaf. For example, if the selected door frame is 40mm, the drawer can be opened. I figured it out, the distance from the right side of the cabinet to the left side of the drawer is 1514, and the two doors are pushed side by side on the same track to open the drawer, but the two doors are pushed side by side to the right. The total width is 1510mm (without anti-collision strip). Therefore, only 4mm away from the drawer, a slight error will not open.
Solution 1: Change the drawer, reduce the width of the drawer, and add 18 slats to the right cabinet.
Solution 2: Change the door. Reduce the two doors on each side by 20mm, and increase the width of one door in the middle by 40mm.
Recommendation: The time to design the cabinet should know the size of the sliding door. Also, for example, if your cabinet is finished after you have done the sliding door measurement, it is totally better than you. It can depend on the person who measures the size of the sliding door. This problem can be completely avoided. (The middle door fan is enlarged by 20mm. The two side door fans can be opened completely by 20mm. Besides, the two side door fans press the two side door frames of the middle door leaf. The difference of a few centimeters is completely different.) Let's take a look at the picture I painted for you:
Ballon screen printer is specical custtomized for PVC balloon.
Install air-blowing device on the Screen Printing Machine. First install the balloon on the mounth of air-blowing,. The balloon will full of air.
Then enter into printing position and finish printing.
1) Standard balloon screen printer install one table. print one bye one.
2) Install one rotating device, Ballon screen printer will increase speed.
3) We will customize full automatic Balloon screen printer for high-end customer. Automatic balloon screen printer can finish all process.
Automatic air-blowing, Automatic rotating, Automatic printing, Automatic air-removing. and automatic flip.
Balloon Screen Printing Machine
Balloon Screen Printing Machine,Screen Printer for Balloon
KC Printing Machine (Group) Limited , https://www.kcautopm.com