High-speed production DVD box special equipment

In 2006, based on the experience of Japanese companies in the development and production of thin-walled container production equipment, in order to meet the high-speed, high-quality, and 10% reduction in production cost of DVD packaging, the company successfully developed and produced a special injection molding machine for DVD packaging. H600".

The main features of the "H600" DVD box injection molding machine are: 1) High-speed injection molding processing, the fastest molding cycle 517 s, and the general DVD injection molding machine molding cycle is the fastest 615 s. The former produces 4,800 per hour, and the latter produces 4,430 per hour. This way, the former produces 370 more per hour, producing 8800 more per day for 24 hours, and the production efficiency increases by 10%. 2) Use "H600" configuration DVD packaging mold production packaging box, each box can save 5g of raw materials, "H600" a year up to 35 million DVD box, according to the current market resin prices, one year raw resin The cost can be reduced by 250,000 U.S. dollars. 3) The clamping mechanism adopts a reciprocating slider type device, which can evenly press the mold, reduce the clamping force, reduce the wear of the mold, increase the service life of the mold, and improve the mold. The sensitivity, that is, when the clamping force is 2% of the pressure, the mold can be protected; 4) the use of hot runner mold to ensure the continuity and stability of the molding process, will not produce excess flow channel material, Improved appearance of molded articles. (Liu Zeze)

Reproduced from: Plastic