How to improve the overall efficiency of inkjet printers?

Today, the printer is an indispensable device for a modern office. All kinds of information and work reports require the printer to output quickly and accurately. Inkjet printers, because of their high cost of use, how to use inkjet printers efficiently and economically will be a problem that users are striving to explore. Some of the techniques provided by the author for using “spray guns” below do not contain much secrets. However, if we can implement it correctly, we believe that we will definitely improve the ability to “splash”.

1. Do not start the printer frequently.

Inkjet printers are not the same as other printers. It is best not to let them start frequently because the printer cleans the printheads and initializes the printer every time it is started. The ink delivery system is filled with ink. Of course, some ink is wasted. This is a drop. A penny for ink!" In addition, if you press and hold the top resume button for more than 2 seconds, the printer will also clean the printhead. Therefore, if the printer runs out of paper, press the resume button after loading the paper and it should be faster than 2 seconds.

2. Select the appropriate print mode.

Inkjet printers provide several print modes, and different print modes consume different degrees of ink. If you just print an ordinary file, I suggest that you use the "economic printing mode" function, using this mode can save half of the ink, and can greatly increase the printing speed. Of course, if you want to pursue print quality, you can only choose other print modes.

3. Learn to use ink.

Usually do not use non-original ink cartridges, because most of the ink cartridges have sponges. Non-original ink cartridges have more leaching of sponges, and the stainless steel filters used in the ink outlets do not meet the requirements, and can easily cause nozzle clogging.

4. When using the cartridge for the first time, set the printer to save the state.

The number of printable ink cartridges varies depending on the type of print you set for the first time. If the print cartridge is set to the photo mode the first time the cartridge is loaded, only a few photos are actually taken, then the program will often calculate more. Some ink usage; if it is set to save state at the beginning, the program may use less ink to calculate the amount of ink remaining when the ink has actually dried.

5. Focus as much on what you want to print as possible.

Now inkjet printers support page layout for printing documents. Using this method to print, the contents of several sheets of paper can be printed on one page. Combining this function with the economy mode when printing proofs can save a lot of ink. It should be noted that this feature is not only set up for saving ink. For example, if you want to print the cover of a book, you will find this feature very useful.

6. Solve the color cast phenomenon.

If the color printed by your inkjet printer does not match the color displayed on the screen, it indicates that the jetting has a color cast. The main reason for reminding you of this phenomenon here is that the software is not properly set up, either because the printer driver version is too low, or that users have made some inappropriate settings in the print software settings. If the cause of the above malfunction is eliminated, we should learn to correct the screen display and the actual printing effect. Different printing software, the specific correction method is not the same, I suggest that when the normal print, open the printer options of common software, record the settings at this time; when there is any fault, you do not have to bother to Analyze the reason, can solve the problem easily after restoring to the previous setting.

7. Pay attention to dust and regular cleaning.

When the ink jet printer is working, the ink in the ink cartridge comes out through the nozzle. After not using the printer for a long time, the ink around the nozzle will gradually solidify in the air, thus blocking the nozzle, and the ink will not be printed later. Out. In order to ensure the normal operation of the printer, I suggest that you regularly start the printer's automatic cleaning function to nozzle cleaning the printer to ensure that the ink will not dry up. The other is to pay attention to dust, when not in use for a long time, cover the printer with a dust cover, because the dust will also make the ink block.

8. Do not drag the paper by hand during printing.

Since the print speed of the ink jet printer is not so fast, many people often open the front panel in order to speed up printing, and drag the paper being printed by hand, which is considered to speed up the printing speed. This law is extremely wrong. The printing speed is mainly related to the performance of the nozzle, not the speed of scrolling the paper [encyclopedia]. Dragging the paper not only does not speed up the printing process, but also damages the internal paper feed mechanism so that the nozzle cannot eject ink at the correct position, causing confusion in processing.

9. Do not remove the ink cartridges when they are not used up.

We know that the ink jet printer detects the amount of ink in the ink cartridge through an inductive sensor, and the sensor prompts the replacement of the ink cartridge as long as the sensor detects that one of the ink amounts is less than the value set in the printer. At this time, we can take out the ink cartridge immediately, and then use the cleaning key in the control panel, and can also be cleaned by the printer's own tool software. Repeating several times, most of the printers are normally used. Remove the ink cartridge and reset the printer's internal sensor to confirm the installation of a new ink cartridge. Note, however, that it should not be turned off. When the ink cartridges have not been used up, it is best not to remove them in order to avoid unnecessary waste.