SOLNA remote control ink machine motor alarm stop troubleshooting

BAIDU_CLB_fillSlot("858283");
If the ink roller load is too large, it will cause the ink fountain motor to stop alarming. The main reason is that the load is too large due to the following two reasons.

1. Ink knife and ink fountain roller contact

(1) Failure analysis

When the ink knife is too low, the ink knife will contact the ink fountain roller, so that the ink roller roller is overloaded. In severe cases, the ink fountain roller feels a slight jitter.

(2) Adjustment method

Set the ink knife position correctly. Adjust the screw with a 3mm long hex wrench until the distance between the top of the ink knife and the ink fountain surface is (185±0.1)mm. Adjust the ink nozzle angle so that the gap between the ink fountain and the ink fountain roller is about 0.02mm.

2. The ink fountain block is in tight contact with the ink fountain roller

(1) Failure analysis

Sometimes to prevent ink leakage, the ink fountain block will be in close contact with the ink fountain roller, but too tight contact will cause the ink fountain roller to load too much. When the ink fountain is locked, if the ink fountain is not parallel to the ink fountain roller, the ink roller will be loaded.

(2) Adjustment method

Correctly adjust the tilt angle of the ink fountain. When locking the ink fountain, check the sides of the ink fountain by adjusting the screws

The angle of inclination is such that it is detected whether the ink stop block is parallel to the ink fountain roller, and the ink fountain screw is generally locked with a force of 5 N?m.

The above content is selected from Keyin Media. Printing Technology ·Digital Graphic Arts 2012 No.8, more journal content please pay attention to the journal channel, the latest journal content click to enter the Keyinwang electronic journal channel.


Product Name

Birch Veneer MDF / Mahogany Cherry Veneer Board

MDF Color

Dark, Light, Bright, Green(Moisture Resistant)

MDF Density

700-900KGS/M3

Formaldehyde Emission

E2 , E1,  E0

MDF Size

1220x2440mm

Thickness

2.5mm- 25mm

Thickness Tolerance

<+-0.2mm

Wood Veneers Available

Chinese Ash, Chinese Oak, Red Beech, Birch, Pine, Okoume, Bintangor, Teak, Red Walnut, Black Walnut, Cheery, American Red Oak, Sapeli, American White Maple, White Oak, etc.

Veneer Cutting/Grain

Crown-Cut, Quarter-Cut

Veneer Thickness

0.2mm-0.5mm

Veneer Grade

A/A, A/B, B/B, B/C, C/C, C/D, D/D, D/E, etc.

Application

Decoration, Office Furniture, Hotel Furniture, Home Furniture, etc.

Veneer MDF

Veneer MDF,Veneer MDF Board,Veneer MDF Sheets,Veneer Coated MDF

Shouguang Bailing Wood Industry Co., LTD. , http://www.bailingfurniture.com