Computer Diecutting Tips

For some special editions with complicated layouts and difficult to draw, the traditional drawing process is changed. When the computer is making a printing plate, a die-cut version of the outline pattern is drawn together, and the pattern film is directly output. In this way, the production efficiency and accuracy are greatly improved, and the accuracy of the die-cutting plate and the printing plate fitting is effectively ensured.

After the production of the die-cut contour pattern film is completed, when the paste is applied, the white latex is first applied on the appropriate part of the plywood, and the surface of the film is adhered to the plywood after the scrape is evenly scraped with a die-cutting knife. , And then use a cloth on the back of the film with a little force evenly leveled, so that the film calmly close to the plywood. After the glue is dried, when sawing, the sawing path can be cut accurately along the outline of the pattern on the film, and the sawing work can be completed without errors.

The use of computer graphics die-cut version outline pattern making die-cutting board, after process practice shows that this method is particularly applicable to the pattern of complex shaped version, its simple, fast and high-precision production effect, welcomed by the operator.

Chongqing Packaging Technology Association