Several problems that are easily overlooked in the process of binding production

1. Paperback books that contain more than 5 printed sheets, especially those made with 32-page art paper, are not suitable for the wireless binding process. Even if you use hot-melt adhesive on coated paper, the bonding strength may not be sufficient. The stack of pages becomes as rigid as cardboard, and the glue line along the spine is prone to cracking or tearing, which can cause the book to fall apart over time.

2. Books with an unusually thick spine cannot be effectively bound using wireless binding techniques. This often results in the middle of the book block being difficult to open. Additionally, the center of the spine may become concave, leading to a rounded edge and structural deformation.

3. For reference books such as periodicals or textbooks that are not intended for long-term preservation, wireless binding is generally not recommended due to its high cost and low production efficiency. It's more practical to choose alternative binding methods that offer better durability and cost-effectiveness.

4. Student textbooks are typically thin and have a short usage period, making them suitable for standard binding processes. However, for reference books or books with collectible or archival value, hardcover binding is strongly recommended. Wireless binding should be avoided because the adhesive used in this process can degrade over time due to environmental factors, often lasting less than three years. This makes it unsuitable for long-term storage or frequent use.

Overall, choosing the right binding method depends on the book’s purpose, material, thickness, and expected lifespan. Understanding these factors ensures that the final product remains durable and functional for its intended audience.