First, the font problem
â‘ Some font library description methods are different, and the overlapped parts of the strokes will appear through the output, be careful!
②Paragraphs containing Chinese and English special characters are prone to problems, such as "■, @, ★, ○", etc.
â‘¢Use the new standard GBK font library to solve the problem of missing remote characters.
â‘£For fonts with too fine strokes, it is better not to use more than 3 colors of aliasing, such as (C10 M30 Y80), etc. Similarly, it is not suitable for reverse white characters on dark backgrounds. In the unavoidable situation, it is necessary to tick the reversed white words, and the approximate background color or a printed monochrome (usually black K) is applicable.
Second, the problem of gradual change
①The common problem is this: such as the gradient of red → black, the setting is wrong: (M100 → K100) it will be ugly in the middle!
The correct setting should be like this: (M100 → M100 K100) After careful analysis, you will understand, other situations can be deduced by analogy.
â‘¡Transparent gradation is a method suitable for network graphics, and grayscale images are also acceptable, but the final output is not possible, because its spatial mixing mode is RGB, and the screen mixing color is too different from the printed CMYK, so pay attention.
â‘¢ The gradient of the black part should not be too low, such as 5% black, due to the black overprint option when outputting, the replacement of black below 10% is usually used instead of overprinting, which causes problems. Similarly, the use of pure light black Be careful.
Third, the picture problem
â‘ One thing to note about the psd file is that you should not do any "destructive operations" after importing it, such as: rotation, mirroring, tilting, etc. Due to its transparent mask, a broken image will be generated after output.
â‘¡It's still a mask. Be careful when using coreldraw. If necessary, it is better to take the "put in a container" method.
â‘¢ Resolution and resampling
Don't do this in corel, "convert to bitmap" is indeed convenient, but the loss is color reproduction, it needs to be professional, and do it in ps.
â‘£ Color mode, don't blame me for being wordy, this is something that even the veteran has done wrong.
All pictures must be cmyk or grayscale and monochrome bitmap, otherwise they cannot be output.
Four, output accessories
That is to say, the accessories such as corner lines and color marks are attached. Now it seems that the output company services are very good, don't worry too much.
5. Pre-press inspection
Use PDF files for pre-press inspection! Note that it is not directly using coreldraw to print a pdf! wrong.
The order is this:
* .cdr → The output is "encapsulated EPS, ie * .EPS", and then Acrobat Distiller will generate the EPS * .pdf.
The PDF files generated in this way can be printed directly by some printing companies, and the files are relatively small, and can be sent by E-mail. It is very convenient.
If there are errors in your file, the PDF preview can be seen at a glance! (Note: Distiller 4 version does not fully reflect some of the borderline effects and needs attention.)
CD Common Disadvantages Solutions
1. The biggest criticism is instability, fake saving, sudden exit, and the interface becomes "shaky" and then the interface font becomes larger, and then die, and so on.
The solution is:
1. Increase the memory; design, without 512M memory is unimaginable.
2. Delete unused fonts, (commonly used fonts can be put in a folder first, during the installation, remove the check mark before "copy fonts to font folder", and then confirm, then the font folder is just some Shortcut. Then install any fonts you need temporarily, then tick "Font ..." and install it, you can easily distinguish the commonly used fonts from the newly installed fonts and delete them when not in use. Off)
3. Switch to 2000 / XP (Do not use the Wending CS series fonts in XP.)
4. Be sure to uninstall, restart, and reinstall after problems occur. If there is a CD9 installation file in the hard disk, you can install it after a cup of tea.
Second, the problem of text layout. Many people complain that the text in CD9 is misaligned, the text box is not easy to use, and the text box cannot be turned into a curve. In fact, as long as everyone develops a good habit, it can be solved:
1. If you can use art text, don't use a text box. Because the text box is very troublesome to turn the curve: first draw a rectangle covering the text box, then ALT + F3 to bring up the filter, select transparency, select black, fill 100%, check "freeze" (the most important step), apply , And then dismiss the group, and remove unnecessary things.
2. When typing numbers or English, enter a space before and after.
3. After finishing writing, press ctrl + T to change the moment between characters from the default 20 to 0, and adjust the line moment to 120% or 150% or 200%. This way the text will not appear very loose.
4. Finally, adjust the paragraph alignment. CD often has a half character misalignment between two lines. At this time, you can select a few words and press "ctrl + shift +>" or "ctrl + shit + <" Adjustment.
3. Printing problem. The solution is also very simple, that is, all the pictures, effects, and shadows are converted into CMYK bitmaps. For printing, 200DPI is enough, fast and good.
4. Prepress issues. If you want to send a film, after imposition, bleeding, and rule-making:
1. All texts turn to curves.
2. All non-CMYK color models are changed to CMYK.
3. All rotated bitmaps are transferred once.
4. All effects, especially three-dimensionalization, shadow, and precise image cutting should be separated or indexed.
5. Convert all RGB images to CMYK.
6. The gradient fill that comes with the CD is RGB, and you should also pay attention to it.
In short, before copying the disk to the issuing company, be sure to look at the "File Information" under the "File" menu. There must be no RGB and effects.
5. Compatibility issues. In fact, as long as it is saved in cd8 format. 9, 10, 11 can be opened. If you want to recognize FH, save it as 6 and tick off the compression when saving.
Different views: CD9 is best saved in CD9 format before output, because CD8 has more output traps than CD9.
Many output traps can be seen in the CD9 preview, but CD8 cannot. r0g0b0 cd9 is k100 and cd8 is four-color. At the output company, many barcodes made by cd8 are produced in four colors. In CD9, the default pantone color palette of CD9 is used. In CD8, it is converted to CMYK due to incompatibility. Saving CD9 in CD8 format will cause the page size to be lost. Save as cd8 format, the output company thinks you made cd8, it will be output with cd8.
18inch Kamado Grill is excellent for individuals and couples,and there are many optional accessories which can use on it like plate setter and pizza stone.
This size Kamado Grill has two different configurations, the stainless steel and iron, you can choose according to your preference. Also has many color available, such as red, black...
The size is a very popular size in the market, such as US, Germany, Holland...,if you like, no hesitate to contact us.
18Inch Kamado Grill,18Inch Ceramic Grill Kamado,18Inch Charcoal Grill Kamado,18Inch Bbq Grill Kamado
Yixing Linchang Technology Co., Ltd. , https://www.kamado-link.com