Cooked Tung Oil Filling Machine | Heat Transfer Oil Filling Machine

Product Name : Automatic edible oil filling machine

Equipment Description : The filling machine http:// machine adopts the principle of piston filling. After the empty can reaches the filling position through the conveying, the compressed air enters the cylinder through the pneumatic triplex, ---dt34wl opens the filling valve, and the piston is on the cam. Under the effect of moving downward in the piston cylinder for filling, after the filling is completed, the filling valve is automatically closed under the action of the cylinder, and the piston cylinder performs suction. After the cans are filled, the hook chains, which are synchronously operated, are sent to the sealing machine for sealing. When the tray mechanism of the canning machine raises the tray tray, the indenter presses the lid, and the two rollers respectively pre-seal and seal the can under the action of the cam. The sealed cans are sent to the can conveyor belt under the action of the cans.

Equipment advantages : The main electrical components are Mitsubishi PLC, Inverter and Proximity Switch. The Siemens analog output and South Korea's solenoid valve are designed by the company's senior electrical engineers as the most reasonable configuration. The entire production speed can be as required. Set itself on the touch screen, all common faults are automatically alarmed, and the corresponding location of the fault is given. According to the severity of the fault, the PLC automatically determines whether the host can continue running or stop.
It is suitable for the quantitative filling of various oils and fats (such as tea seed oil, sunflower oil, olive oil), edible oil materials, high concentration and various vegetable oils.

Bottled edible oil filling machine http://
Automatic vegetable oil filling machine http://
Blending oil filling machine http://
Peanut oil filling machine http://
Tung oil filling machine http://

The main technical parameters :

Sealing heads

4

Filling head

12

Production capacity

80~200 cans/minute (related to filling volume, etc.)

Applicable tank height

39～160mm

Applicable can diameter

Φ52.5～φ99mm

Filling capacity

70~850g (currently there are three kinds of bores)

Motor Power

5.5kw

Weight

4000kg

Dimensions

2800×1600×1900mm

Equipment installation and commissioning:

1. Placement: Select a place where the interior is flat and dry, and place the host and the transfer table after the opening. The main machine is on the inside of the conveyor table so that the filling head is vertically above the center of the conveyor table.
2. Install the conveyor: Install the bottom of the conveyor belt and the column stably. The bottom bolt can be adjusted slightly. Check the elasticity of the conveyor chain plate, and turn on the power (the back of the main power box of the code source line plug). The conveyor belt should rotate smoothly and the speed regulation is effective.
3, configuration power: The automatic filling machine uses a voltage 220V single-phase three-wire power supply, current 3A. When users access the power supply, they must have reliable grounding to ensure personal safety.
4. Configuration gas source: The gas source used in this equipment is 0.4-0.6MPa. The user-configured gas source drug is stable and ensures the uniformity of the cylinder movement to achieve accurate filling effect.
5, installation of photoeye: According to the installation position on the table to fix the photoeye, each group of the shooting position to be accurate, to achieve accurate counting effect.
6, boot: After all the installation is complete, you can start the test machine under the guidance of professionals, in the test process if any problems should be timely feedback, make the appropriate adjustments.

Equipment is a helpful assistant to help us in daily production. We also need to understand and use the equipment:

1. The gas path of this machine must not be arbitrarily inserted and inserted.
2. Do not flush the body directly with water when washing or washing the machine.
3. If overflow phenomenon occurs in the injection nozzle, press the emergency stop switch to ensure the workshop is tidy.
4. When the cylinder head can not be returned due to improper operation, please press the button to reset it.