Key points for pre-press output review
1. The characters are wrong or missing; ensure that the font is not reported missing when opening the typesetting file, or that it can be permanently replaced with a similar font after the customer's consent; ensure that the characters in the typesetting file are real characters selected from the character menu, not from the style menu The selected style is similar to "bold"; another note is that in some RIPs, character substitution and string bits are caused by the interference between TrueType and Type1PostScript characters.
2. The format, mode and resolution of the image; check the image link, ensure that there is no shortage of images, ensure that the image format is a universal format (TIF, EPS, etc.), and ensure that the image or color block is in the CMYK four-color printing mode (RGB The mode will become gray when RIP color separation), to ensure that the resolution of the image is suitable for printing requirements, and do not zoom the image too large.
3. Overprint and register color; pay attention to whether some black text and lines are set with overprint (color separation check whether it is hollow), black text is monochromatic black, to avoid the appearance of four-color text; in addition, if it is manually added sign money Be sure to determine the four-color process color.
4. Imposition and marking; understand the binding method of the document to ensure that the imposition and folding are correct. The imposition large page should have finished lines, registration lines, (folding lines, spine lines-used for folding and binding book covers ) The required marks such as ladder scale and color identification; bleeding is in place.
5. Bleeding and graphic margins; bleeding graphics and text should be in place (generally 3mm, sometimes 2mm-5mm depending on the paper size or post-press processing conditions), the graphics and text in the layout should maintain a certain distance from the finished line, So as not to be cut off or affect the appearance of the page.
6. Graphic spacing and color difference; ensure that the image does not press the text (in some typesetting software, when performing imposition or image re-insertion, etc., the mutual exclusion of the image and text often fails, so that the image is pressed on the text) ; Ensure the clarity of the text on the base map (when the text is pressed on the base map that wants to be close to the color, you should pay attention to adding shadows or borders and other modifications).
Pre-press output notes
1) The text, frame and color of RGB mode in CorelDraw6.0 / 8.0 / 9.0 must be converted to CMYK color mode. If you have used the POWERCLIP (Precision Image Crop) effect in CorelDraw, please point out when publishing.
2) In CorelDraw8.0 / 9.0, if the PSD format image is rotated, the TIF image has extra channels, and the image is prone to breakage. Please convert the image to a bitmap in CorelDraw. Please use TIFF format when sending. And look at the preview on RIP. If there is a problem in the conversion of PSD format pictures, the company is not responsible for the consequences of the film, please use it carefully.
3) The effect used in CorelDraw8.0 / 9.0, please convert it to a bitmap. If there is a problem without conversion, the company is not responsible for the consequences of the film, please use it carefully. In CorelDraw 8.0, the grayscale PSD mode picture is printed in overprint, and must be converted to CMYK color mode.
4) Please create a PS file for the issuance of the Founder documents. If there are supplements, please specify. Please use the Mongolian font for the Mongolian documents.
5) Word files cannot be sent in color, but can be spelled out in large format, which is prone to missing words and pictures. You should see the preview on the RIP and then output the film.
6) PageMaker6.0 / 6.5 files, TIFF format pictures are easy to be elongated, please use EPS color separation format. The Founder font is prone to breakage, please do not use it.
7) Please do not store other files for the MO, CD or hard disk used by the customer for output, and make a backup. If it is damaged or lost accidentally, the company is only responsible for repairing or compensating the MO disk, CD or hard disk, and is not responsible for the contents .
8) The documents exported by our company can be kept for a maximum of 24 hours. If you find a problem with the film, please submit it within 24 hours after the film is taken.
9) For the final inspection by the customer, please make proofs before printing, or print out after proofing. If there is a mistake in the arrangement, the company is not responsible for any joint liability except for the soft film.
18"11.5g Gold Powder Big Man Hanger
Multifunctional Powder Big Man Hanger,Newest Fashion Powder Big Man Hanger,Space Saving Powder Big Man Hanger,Bulk Powder Big Man Hanger
SHAOXING DINGLI METAL CLOTHESHORSE CO., LTD , https://www.dingliclothrack.com