Appendix IV GB191-90 "Packaging, Storage and Transportation Icon Marking"

National Standard Packaging and Transportation Logo GB 191-90
In place of GB 191-85 Packaging- Picoral markings for nandling of goods GB5892-86

This standard refers to the use of the international standard IS0780-1985 "Package Cargo Graphic Symbol."

1 Theme Content and Scope of Application This standard specifies the name, size, color and usage of the packaging, storage, and transportation icons.
This standard applies to the transport packaging of various goods.
There are 12 kinds of logos and names of logos. There are 12 kinds of pictograms. The figures and names are as shown in Table 1.

3 The size and color of the logo
3.1 Size of Signs The size of signs is generally divided into four types, as shown in Table 2.
Table 2

The width size is 1 70 50 2 140 100 3 200 150 4 280 200

Note: In the case of oversized or extremely small shipping packages, the size of the logo can be expanded or reduced as appropriate in Table 2.
3.2 Logo color The logo color is generally black. If the color of the package makes the iconic logo appear unclear, other colors may be used for printing. The appropriate contrasting color may also be selected on the printed surface. Red and orange should generally be avoided. The pasted logo is printed in black on white.
4 How to use the logo
4.1 The marking of markings can be printed, pasted, hung, nailed and sprayed. When printing, the outer frame line and the name of the logo must be printed; when spraying, the outer frame line and the name of the logo can be omitted.
4.2 The number and location of signs are as follows:
4.2.1 box packaging: located in the obvious place of packaging;
Bags, bundles of packaging: located in the barrel or lid; barrel-shaped packaging: located in the barrel or lid;
Containers, Grouped Goods: Paste four
4.2.2 The following provisions apply to signs 6 and 8.
The sign 6 "Here is lifted" should be marked on the actual lifting position on the two opposite sides of the package.
The mark 8 "center of gravity" should be marked on the four sides that correctly mark the actual center of gravity of the package.
4.3 The writing of the logo shall be parallel to the bottom edge; the export goods shall be marked according to the relevant provisions of foreign trade; the pasted logo shall be guaranteed not to fall off during the storage and transportation of the goods.
4.4 What kind of signs should be marked on the transport package should be correctly selected according to the nature of the goods.
4.5 The mark is marked by the production unit before the goods leave the factory. After the delivery, if the packaging is changed, the mark is changed by the packaging unit.

Additional information:
This standard was proposed by the Ministry of Railways
This standard is under the jurisdiction of the Ministry of Railways Standardization Institute and responsible for drafting.
This standard was first released in October 1963, revised in September 1973 for the first time, and revised in June 1985 for the second time.
The main drafters of this standard are Zhang Jin and Wang Jugang.
This standard is commissioned by the Institute of Standards Lecturer of the Ministry of Railways to explain.