Application of film smooth opening anti-adhesion masterbatch

Can significantly reduce the friction coefficient of various films, packaging films, etc., can ensure that the final product and film, metal friction at low temperatures maintain low friction coefficient, greatly improve the printing speed and liquid filling speed, and the traditional Compared with amide type slip agent, the masterbatch does not precipitate, does not affect the printing and heat sealing of the film, and does not need to be stored or waited. No frost is generated during production and processing, and no amide slip agent is produced. The appearance of the taste is the most ideal polymer slip agent.

After adding this product, the film has the following characteristics:                            

● This product has good thermal stability, no smoke during processing. Adding a very small amount results in good thermal slidability of the film and a low coefficient of friction. The film has an anti-adhesive effect at room temperature. No additional anti-adhesives are needed.

● Only need to add to the surface layer of the film, do not need to add additional smooth masterbatch.

● Compared with inorganic silicon-based opening agent, the friction coefficient can be reduced by more than 50% at 80 °C .

● can improve the film molding rate and quality. Make the surface of the film smoother and more open.

● It has little effect on the haze of the film. Does not affect printing. No adverse effect on film strength, heat sealing performance, etc.

Usage and dosage:

  This product is a uniform particle, and it can be directly molded after being mixed with the resin. With reference to an amount of 1-4% friction coefficient of up to 0.20.

Packaging: This product uses moisture-proof paper-plastic composite bags , net weight 25 kg per bag .