Autumn furniture is easy to "get angry" Four strokes can be eased

In the autumn, the air becomes relatively dry, and some household products start to have a "temper". For example, the wooden floor shrinks, the gap between the board and the board increases; the wall and the door frame have different gaps due to different materials and shrinkage rates. Experts gave a "self-rescue" approach to common symptoms

Symptom 1: Cracking the door frame made on site

Mr. Zhu, who lives in a certain district of Qingdao, has recently renovated a new house. The door sets at home are made by the decoration workers. However, when he was inspected, he found that there was at least 3 mm of cracks between the door frame and the wall of the living room. This was also the case in other rooms. On the door frame, there are cracks between the positive and side solid wood strips. The door frame is not tight, and the entire door cover is loose. The reporter saw that the door cover was not made of wood lining, and the decoration worker directly installed the thin wooden lines on the door wall.

Analysis of the reasons: Mr. Zeng, a project manager of a brand decoration company in Qingdao, said that unless the quality is good and the thick wood lines are used, it is not solid to install the door cover directly with thin wood lines because the physical properties of the materials are different. Such a door cover is not easy to come into stable contact with the wall. In addition, when the wood line with insufficient thickness is in contact with the wall surface, it will crack and deform.

Solution: The cracks in the door cover can be filled with adhesive and then repaired with the original color paint of the door cover. If the door cover material is too thin, it is best to ask the worker to rework.

Special reminder: When selecting the wooden lines, the owner should pay attention to carefully check the texture and color of the lines. When installing the corners of the door mouldings, ensure that the joints are tight and the trunking is smooth and firm, preventing the autumn from cracking due to dry weather. In the case of grooved wood lines, the nail holes should be nailed as much as possible in the line.

Symptom 2: Increase the gap between solid wood floors

In July, the solid wood flooring just paved, when it enters the autumn, there will be problems such as shrinkage of the wooden floor, increase of the seam of the board, cracking of the interface of different materials. This has already made the owner Mr. Meng upset, but the merchant replied that "wait until next spring to repair again", the reason is to let the solid wood floor fully shrink. Mr. Meng is worried that this is a â€œslow planâ€ for the merchants and will not be repaired.

Analysis of the cause: After the fall, the weather becomes dry, the humidity in the air is greatly reduced, and the solid wood floor will shrink, resulting in a large joint seam. There is some truth to the practice of delaying the maintenance of the company in the spring of the year. In the winter, the shrinkage of solid wood flooring is likely to increase.

Solution: In the autumn, you should pay attention not to worry. When the spring of the coming year, the temperature difference between the four seasons will change significantly. After the cracking and deformation of the solid wood floor is no longer developed, it will be repaired once. This will ensure better results and eliminate the hassle of repeated repairs.

Special reminder: Autumn is coming, solid wood floor waxing maintenance is at the time. Wipe the floor clean before waxing, then apply a layer of floor wax evenly on the surface. After a while, wipe it with a soft cloth until it is smooth and bright. Ventilation should be done as much as possible to keep the air flowing inside the house. After a while, after the weather is getting dry, you need to use a humidifier to adjust the indoor humidity.

Symptom 3: Seamless laying bricks buried hidden dangers

Ms. Feng, who lives in a certain district of Fengxiang Road in Qingdao, used the tile without sewed to decorate the new house in January, achieving a neat and uniform decorative effect. At that time, she was very satisfied, but after a summer, the problem followed. The small wall tiles of the bathroom wall of 15 cm Ã— 15 cm, due to the closeness of the paving, the phenomenon of arching occurs during the thermal expansion and contraction. Recently, one or two tiles even fell off.

Analysis of the reasons: Mr. Zhang, a decoration expert, said that because the thermal expansion and contraction coefficients of the base layer, the bonding layer and the ceramic tile itself are very different, under the thermal cold tension damage of 1~2 years, the overly dense paving is easy to cause the tile to bulge. , breakage and other issues. If you re-mass a large-scale paving after such problems, the cost will be two or three times more expensive than the first time.

Solution: Remove the sand from the back of the tile and mix it with cement and glue. It should be noted that if the tile is only partially peeled off, it is not possible to tap the mortar on the base layer to prevent the original tile from being loose.

Special reminder: When the user puts the tile, the seam can be adjusted between 2~3mm. At the same time, in order to avoid wasting materials, a number of selected products can be randomly sampled on the ground for non-bonded test shops. If it is found that there is obvious color difference, dimensional deviation, uneven gap between brick and brick, uneven chamfer, etc., if the satisfactory result is not achieved after the adjustment of brick position, the laying should be stopped in time and contact with the material supplier. Exchange.

Symptom 4: The corner of the wallpaper is tilted

During the renovation, Mr. Wu used the wallpaper in the entrance of the home. However, after only staying for more than a month, the wallpaper was out of shape - the corners of the wallpaper were upturned. Touch the back of the wallpaper with your hand and drop the white powder.

Analysis of the reasons: In the autumn decoration, not only the wallpaper should be â€œhydratedâ€, but also the wallpaper should be dried naturally, but it should not be ventilated like the summer decoration. Because it is so easy to let the freshly laid wallpaper be blown dry by the wind, thus losing water and deformation.

Solution: Clean the original glue on the wallpaper, brush some white latex on the back of the wallpaper, brush the water on the front of the wallpaper, and scrape it with a plastic scraper. Finally, the bead is attached, and the bead is removed after the drying. Because the autumn climate is relatively dry, the wallpaper and wall coverings must be soaked in the water before the paving, and then the glue is applied.

Special reminder: If the owner encounters the phenomenon of wallpaper blistering, he can use the sewing needle at home to smear the bubbles on the surface of the wallpaper to release the gas, then use the needle tube to extract the proper amount of adhesive and inject it into the needle hole just punctured. Finally, use a scraper to smooth the compaction and dry it.

Any custom request of shape ,size and material is available ,MOQ:1 SET !

Handing display banner is one of the hot selling trade show equipment and widely used for various events to make promotions smart & eye catching .Aluminum frame is packed in folding sections,lightweight,portable and easy to set - up.

The details for different shape of our hanging banners :

Football Shape Hanging Banner :

S size :L 10ft x H 42in

M size: L 10ft x H 48in

L size: L 12ft x H 5ft

football hanging banners