Push-pull tester purchase tips

Push-pull tester purchase tips

Dongguan Haida Instrument Co., Ltd. 400-071-1808/0769-89280808

1 , first of all should consider what kind of material test:

The difference in the pull range determines the size of the sensor used, which determines the structure of the puller , but this has little effect on the price ( except for the gate type ) . For general flexible packaging manufacturers, a tension range of 100N is sufficient. Therefore, it is also decided to use a single arm type. The structure corresponding to a single-arm type is a portal structure, which is adapted to a relatively large pulling force, such as one ton or more. Therefore, soft packaging manufacturers basically do not need.

2, Standard configuration problem.

Rally machine basically has three basic configurations: host computer, microcomputer, and printer. If the microcomputer is powerful, it can be directly printed. In addition can also be equipped with ordinary computers. With a computer, you can perform complex data analysis, such as data editing, local magnification, adjustable report formats, and statistical analysis of grouped patterns. If equipped with a computer, the manufacturer should be added to the corresponding control system.

3 , to do the material test stroke problem:

According to the performance and requirements of non-metallic materials test, the stroke can be 800mm . Materials with an elongation of more than 1000% can be used with a stroke of 1000 or 1200mm .