How to install the toilet? Recently, many home improvement netizens have consulted the issue of the precautions for the installation of the toilet. The following editor will introduce the method of installing the toilet in detail.
Preparation for installation of flush toilets
1. Check the ground level of the toilet to be installed, if it is found to be inclined, it can be installed after adjusting to the level
2. Check the sewage pipe of the toilet before installation, and clear the debris, waste paper and other debris in the sewage pipe
3. Keep the drain outlet 2-5 mm above the ground;
4. After commissioning and installing the water tank accessories, connect the tap water, fill the water tank, and observe the water tank or water inlet hose for a few minutes to see if there is any leakage;
5. The water pressure of the tap water is generally stable, after the water tank is filled with water. Test the toilet's blowdown effect and see if the flush is powerful. If the water flow vortex is very fast and rushes quickly, it means that the water is flowing smoothly, otherwise, check whether there is a blockage.
Installation method of flush toilet
Method one: Pull and bolt fixing method
This method is aimed at the toilet with a mounting hole at the bottom. Put the toilet on the installation position, use a pencil to draw the hole and bottom corridor on the ground according to the position of the installation hole, then remove the toilet, open the hole at the marked position and insert the explosion bolt, sit Apply adhesive to the joint of the toilet outlet and the ground sewage outlet, place the toilet smoothly, pull the bolt firmly, and finally seal the toilet foot with cement mortar.
Method 2: Cement bonding method
This method is aimed at the toilet with no mounting holes at the bottom. Put the toilet on the installation position, use a pencil to draw the bottom corridor of the toilet, lay a circle of cement mortar with a width of 30mm and a height of 15mm inward along the contour line, and discharge it on the toilet outlet and ground
Apply adhesive to the joint of the surface sewage outlet, wipe the foot of the toilet, and place it on the installation position smoothly to make it adhere firmly and wipe off the overflowing cement mortar.
After the toilet is fixed, immediately wipe off the excess cement adhering to the toilet and the ground; connect the toilet tank to the water pipe; check the tank for leaks, and then flush the water to check whether the sewage pipe is unobstructed.
Warm reminder: For more information about toilet installation, please pay attention to the information on this website , or you can visit the offline experience hall of this website to consult directly.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
The top ten brands of toilet cement home improvement
Adult Raincape,Adult Rain Cape,Pvc Adult Raincape,Adult Rain Poncho
Jinzhou City Hejin Clothing CO.,Ltd , https://www.hejin-cloth.com