Handmade roll paper tissue box

* Roll type napkin tray
Main body: 29.5cm Ã— 29.5cm (2 photos)

Base plate: 14.5cm Ã— 14.5cm (6 photos)

Cover : 15cm Ã— 15cm (6 photos)

1. After folding the crease according to the diagonal line, fold the four corners to the center point position and then unfold it to fold the crease.
2. Fold the four corners onto the 1/2 crease that was previously folded.
3. The four corners are then folded according to the dotted line.
4. Fold the two diagonals in the fold according to the dotted line.
5. Fold in the direction indicated by the arrow in the dotted line.
6. Fold the ends together.
7. Fold the folds according to the dotted line.
8. Make three main parts in the same way.
9. The main part is completed by sticking the three main parts together.

1. After the left and right sides are folded to the center line, they are unfolded and the folds are folded out.
2. Fold the O point on the right to the O point on the left.
3. Reverse the direction in the same way.
4. Fold it up as shown in the figure and then unfold it to fold the crease.
5. In the direction indicated by the arrow, tilt the upper part and fold it in according to the dotted line.
6. Fold according to the dotted line.
7, folded well.
8. After making 6 identical parts, the parts marked with diagonal lines on the figure are glued and inserted.
9. Assemble the two parts of the map.
10. After assembly, apply glue on the area marked with diagonal lines and paste it on the side.
11. This completes the bottom plate.

1. From the 7th step of the bottom plate operation, fold it down according to the dotted line.
2. Make 6 identical parts.
3. Assemble the six parts in the same way as step 9 of the bottom plate step and paste with glue.
4. Complete the lid.
5. The assembly is complete.